•  
  • Excavator: 20T - 50T

    Excavator: 20T - 50T
    Enquire Price Quote

    Excavator: 20T - 50T

    Digga's PD25 to PD50 range of drilling auger drives are ideally suited for 20 to 50t excavators with a flow between 70 to 230 lpm. Fitted with Digga / Eaton bell motors with integrated pressure relief valve and input housing. An innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.

    • Compact high torque Digga manufactured gearbox
    • Highly efficient design with less moving parts
    • Fitted with Eaton/Digga geroler hydraulic motor
    • No case drain required
    • Full range of shafts available upon request
    • Extreme duty shaft locking system
    • Drive fits down the hole for greater digging depth
    • Low maintenance with 5yr gear box and 3yr motor warranty

     

    • Ability to add Swing Control
      Digga’s patented Swing Control System dampens the auger drive / auger swing allowing operators to shake dirt off their augers and travelling around sites safer and easier. SCS also greatly improves productivity by making it easier to return the auger into the hole.
    • PRV Included
      Eliminates the need for a bulky and expensive valve block.
    • Cutting Edge Design
      Digga drives are the most compact in the industry. Digga drives can be put down the hole for greater hole depth without voiding the warranty.
    • 2 Piece Shaft Design
      Isolates the planetary gears from excessive side load. Oversized thrust washer and lock nuts secure the shaft. Easy seal changes and easier servicing.
    • Integrated Motor & Output
      Reduces weight and size of drive. Reduces potential leak points and number of parts.
    • Ability to add Diggalign
      Diggalign is an auger alignment system which indicates when an auger or screw pile is not vertical or plumb, ensuring correct alignment when drilling or anchoring. Diggalign monitors forward / aft & side to side positioning and can be set at any angle
    • Eaton Motor
      Digga designed the Bell motor in conjunction with Eaton. The Motors are highly reliable and serviceable worldwide.
    • Australian Made
      Quality Materials used in production and Digga Controls all facets of production and quality control.
    • True Warranty
      Digga stands behind its products with industry leading warranty and after sale service. 5 year gearbox and 3 year motor warranty - Guaranteed.
    • Lifetime Shaft Pull Out Warranty
      We guarantee our shafts will not fall out - even after continuous use.
    Specification PD25 PD30 PD40 PD50
    Rec Flow Range 70-230 lpm 70-230 lpm 70-230 lpm 70-230 lpm
    Nominal Torque 25800 Nm 30300 Nm 32700 Nm 38400 Nm
    Pressure Valve Fitted Included Included Included Included
    Max Pressure - - - - - - - - - - Do not exceed 240 bar @ 150 lpm - - - - - - - - - -
    Max Flow - - - - - - - - - - Do not exceed 230 lpm @ 150 bar - - - - - - - - - -
    Max Power - - - - - - - - - - Do not exceed 60 Kw (80 hp) - - - - - - - - - -
    Overall Length 1152 mm 1152 mm 1152 mm 1152 mm
    Diameter 355 mm 355 mm 355 mm 355 mm
    Weight (no frame / hitch) 300 Kg 300 Kg 300 Kg 300 Kg
    Std Output Shaft 100 mm Square 100 mm Square 100 mm Square 100 mm Square
    Swing Control Optional Optional Optional Optional
    Diggalign Optional Optional Optional Optional
    Rec Auger A10 / A11 A10 / A11 A10 / A11 A10 / A11
    Max Auger Dia Clay / Shale 1200 mm 1250 mm 1500 mm 1500 mm
    Max Auger Dia Earth 1600 mm 1600 mm 1800 mm 2000 mm

    (*) Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.

    Enquire & Price Quote

    For pricing or more information about the Excavator: 20T - 50T, fill out the form and we'll be in touch soon. Alternatively call (08) 9457 1544.

Top
0