•  
  • Excavator / Backhoe: 5T - 10T

    Excavator / Backhoe: 5T - 10T

    Excavator / Backhoe: 5T - 10T

    Digga's PD4 to PD7 range of drilling auger drives are ideally suited for Backhoes and Excavators with a flow between 55 to 115 lpm. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions.

    • Compact high torque Digga manufactured gearbox
    • Highly efficient design with less moving parts
    • Fitted with Eaton/Digga geroler hydraulic motor
    • No case drain required
    • Full range of shafts available upon request
    • Extreme duty shaft locking system
    • Drive fits down the hole for greater digging depth
    • Low maintenance with 5yr gear box and 3yr motor warranty

     

    • Ability to add Swing Control
      Digga’s patented Swing Control System dampens the auger drive / auger swing allowing operators to shake dirt off their augers and travelling around sites safer and easier. SCS also greatly improves productivity by making it easier to return the auger into the hole.
    • Top Mounted Hose Ports
      Angled fittings allow the hoses to come out the top of the hood so they are out of the way and permits the drive to fit down the hole on 2k motor drives.
    • Optional PRV
      Eliminates the need for a bulky and expensive valve block.
    • Cutting Edge Design
      Digga drives are the most compact in the industry. Digga drives can be put down the hole for greater hole depth without voiding the warranty.
    • 2 Piece Shaft Design
      Isolates the planetary gears from excessive side load. Oversized thrust washer and lock nuts secure the shaft. Easy seal changes and easier servicing.
    • Ability to add Diggalign
      Diggalign is an auger alignment system which indicates when an auger or screw pile is not vertical or plumb, ensuring correct alignment when drilling or anchoring. Diggalign monitors forward / aft & side to side positioning and can be set at any angle
    • Integrated Motor & Output
      Reduces weight and size of drive. Reduces potential leak points and number of parts.
    • Eaton Motor
      Digga designed the Bell motor in conjunction with Eaton. The Motors are highly reliable and serviceable worldwide.
    • Australian Made
      Quality Materials used in production and Digga Controls all facets of production and quality control.
    • True Warranty
      Digga stands behind its products with industry leading warranty and after sale service. 5 year gearbox and 3 year motor warranty - Guaranteed.
    • Lifetime Shaft Pull Out Warranty
      We guarantee our shafts will not fall out - even after continuous use.
    Specification PD5 PD6 PD7
    Rec Flow Range 60-95 lpm 70-115 lpm 60-90 lpm
    Nominal Torque 5151 Nm 5596 Nm 6040 Nm
    Pressure Valve Fitted Optional Optional Optional
    Max Pressure Do not exceed 240 bar @ 60 lpm
    Max Flow Do not exceed 115 lpm @ 130 bar
    Max Power Do not exceed 25 Kw (34 hp)
    Overall Length 579 mm 730 mm 734 mm
    Diameter 240 mm 240 mm 240 mm
    Weight (no frame / hitch) 62 Kg 84 Kg 89 Kg
    Std Output Shaft 75 mm Square 75 mm Square 75 mm Square
    Swing Control Optional Optional Optional
    Diggalign Optional Optional Optional
    Rec Auger A6 / A7 A6 / A7 A6 / A7
    Max Auger Dia Clay / Shale 900 mm 900 mm 900 mm
    Max Auger Dia Earth 1000 mm 1000 mm 1000 mm

    (*) Max/min drilling diameter (DIA) dependent on ground conditions. Guide is a recommendation only.

    For larger auger drives, higher flow, see high flow range.

    Have you got questions about Excavator / Backhoe: 5T - 10T? Get in touch for more information.

    @
Top
0