Skid Steer Loader

Digga’s PD3 to PD6 range of premium drilling auger drives are ideally suited for skid steer loaders with a flow between 40 to 90 lpm. Digga planetary auger drives are fitted with Digga / Eaton bell motors specially designed for drilling and augering in most ground conditions. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns.

  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton/Digga geroler hydraulic motor
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty

 

  • Ability to add Swing Control
    Digga’s patented Swing Control System dampens the auger drive / auger swing allowing operators to shake dirt off their augers and travelling around sites safer and easier. SCS also greatly improves productivity by making it easier to return the auger into the hole.
  • Top Mounted Hose Ports
    Angled fittings allow the hoses to come out the top of the hood so they are out of the way and permits the drive to fit down the hole on 2k motor drives.
  • Optional PRV
    Eliminates the need for a bulky and expensive valve block.
  • Cutting Edge Design
    Digga drives are the most compact in the industry. Digga drives can be put down the hole for greater hole depth without voiding the warranty.
  • 2 Piece Shaft Design
    Isolates the planetary gears from excessive side load. Oversized thrust washer and lock nuts secure the shaft. Easy seal changes and easier servicing.
  • Ability to add Diggalign
    Diggalign is an auger alignment system which indicates when an auger or screw pile is not vertical or plumb, ensuring correct alignment when drilling or anchoring. Diggalign monitors forward / aft & side to side positioning and can be set at any angle
  • Integrated Motor & Output
    Reduces weight and size of drive. Reduces potential leak points and number of parts.
  • Eaton Motor
    Digga designed the Bell motor in conjunction with Eaton. The Motors are highly reliable and serviceable worldwide.
  • Australian Made
    Quality Materials used in production and Digga Controls all facets of production and quality control.
  • True Warranty
    Digga stands behind its products with industry leading warranty and after sale service. 5 year gearbox and 3 year motor warranty – Guaranteed.
  • Lifetime Shaft Pull Out Warranty
    We guarantee our shafts will not fall out – even after continuous use.
Specification PD3 PD4R PD4S PD5 PD6
Rec Flow Range 40-75 lpm 45-80 lpm 45-80 lpm 50-90 lpm 50-90 lpm
Nominal Torque 3600 Nm 4473 Nm 4473 Nm 5150 Nm 5600 Nm
Pressure Valve Fitted Optional Optional Optional Optional Optional
Max Pressure – – – – – – – – – – Do not exceed 240 bar @ 60 lpm – – – – – – – – – –
Max Flow – – – – – – – – – – Do not exceed 115 lpm @ 130 bar – – – – – – – – – –
Max Power – – – – – – – – – – Do not exceed 25 Kw (34 hp) – – – – – – – – – –
Overall Length 579 mm 579 mm 579 mm 579 mm 730 mm
Diameter 240 mm 240 mm 240 mm 240 mm 240 mm
Weight (no frame / hitch) 56 Kg 56 Kg 56 Kg 64 Kg 86 Kg
Std Output Shaft 65 mm Round 65 mm Round 75 mm Square 75 mm Square 75 mm Square
Swing Control Optional Optional Optional Optional Optional
Diggalign Optional Optional Optional Optional Optional
Rec Auger A4/AGT/AGS A4/AGT/AGS A6 / A7 A6 / A7 A6 / A7
Max Auger Dia Clay / Shale 600 mm 600 mm 600 mm 750 mm 900 mm
Max Auger Dia Earth 750 mm 900 mm 900 mm 1000 mm 1000 mm

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

Enquire & Price Quote

For pricing or more information about the Skid Steer Loader fill out the form and we'll be in touch soon. Alternatively call (08) 9457 1544.

  • This field is for validation purposes and should be left unchanged.
Top